SMP10 Pyranometer

  • ISO 9060 Secondary Standard pyranometer
  • No change of desiccant for 10 years
  • Smart, more than just digital
  • RS-485 Modbus® communication
  • 5 year warranty (*)
Add this product to basket Request information
Share this page

SMP10 Pyranometer

The SMP10 is a secondary standard pyranometer that combines the sensor technology from the CMP 11, the Smart interface from the SMP11 and the low maintenance from the CMP10.

The SMP10 has an internal drying cartridge that will last for at least 10 years if the housing is not opened. This minimizes maintenance significantly.

The interval for dome cleaning can be extended, and the quality of measurements maximized, by fitting SMP10 with the CVF4 ventilation unit.

The SMP10 has Modbus® interface, amplified analogue output, improved response time and temperature corrected measurement data. The wide and low power supply range from 5 to 30 VDC makes integration in meteorological and solar energy stations easy. The SMP10 is protected against over voltage, reversed polarity and short circuiting.

Thanks to the standardized output and connections of every SMP10, exchanging instruments for recalibration is easy.

SmartExplorer Windows™ software for data logging, display of data and Modbus® address setting is provided as standard.

(*) This product will need to be registered by the end-user within 6 months of purchase to activate the warranty extension.

Back to productcategory

Specifications

Spectral range (50% points) 285 to 2800 nm
Response time (63%) < 0.7 s
Response time (95%) < 2 s
Zero offset A < 7 W/m²
Zero offset B < 2 W/m²
Directional response (up to 80° with 1000 W/m² beam) < 10 W/m²
Temperature dependence of sensitivity (-20 ºC to +50 ºC) < 1 %
Analogue output (-V version) 0 to 1 V
Analogue output (-A version) 4 to 20 mA
Digital output 2-wire RS-485

FAQ

  • What kind of services do you provide for the SMP10?
    • SMP10-V & SMP10-A SMART Pyranometer (molecular sieve)
      Part number: Description: Extra information:
      0338750 Inspection Full inspection + inspection report.
      0999910-2 Sensitivity calibration Indoor calibration against traceable reference.
      (New calibration certificate will be supplied)
      9016381 Sunshield
      0016400 Leveling screw
      0016401 Fixed foot
      0362417 Outer dome kit Mounted on ring and includes fixing screws and o-ring seal.
      2523146 Waterproof 8-pin plug
      0362621 Waterproof 8-pin plug +10m cable
      0362622 Waterproof 8-pin plug +15m cable
      0362623 Waterproof 8-pin plug +25m cable
      0362624 Waterproof 8-pin plug +50m cable
      0362625 Waterproof 8-pin plug +100m cable
      0362774 Replace outer glass dome Factory repair (new dome will be fitted)
      0362771 Replace inner glass dome Factory repair (new dome will be fitted)
      0362752 Replace bubble level Factory repair (new bubble level will be fitted)
      0374700 Replacement smart interface (Volt) Factory repair (new smart interface will be fitted)
      0374701 Replacement smart interface (Ampere) Factory repair (new smart interface will be fitted)
      0365715 Configuration smart We can apply your required communication parameters
      Service Replace detector Factory repair (new detector will be fitted)
      0362100 Large radiometer fixing kit Fixing kit
      0999911 Replacement calibration certificate Please provide serial number and instrument type.
      0999910-3 Sensitivity calibration ISO17025 Calibration can only be done between april and september.
      0305722 Glare screen kit For downwards facing setup.
      Service Replace 10K thermistor Factory repair (new 10K thermistor will be fitted)

      Is your question still unanswered? Contact Support
  • What type of pyranometer can I use for my fixed PV panels farm?
    • For this application the CMP10 and SMP10 are advised as they have an internal drying cartridge that will last for at least 10 years.

      Please note that the pyranometer needs to be mounted in the same angle (POA) as the PV panel. 

       

      For users that prefer the desiccant visible Kipp & Zonen offers the CMP11 and SMP11 with visible and user changeable desiccant.

      Is your question still unanswered? Contact Support