CGR3 Pyrgeometer

  • Low cost pyrgeometer
  • No change of desiccant for 10 years
  • Accurate routine measurements
  • Weatherproof cable connector
  • Easy way of leveling the instrument
  • Two CGR 3s can form a net pyrgeometer
  • 5 year warranty (*)
Add this product to basket Request information
Share this page

CGR3 Pyrgeometer

The CGR3 is a pyrgeometer, designed for meteorological measurements of downward atmospheric long wave radiation. The CGR3 provides a voltage that is proportional to the net radiation in the far infrared (FIR). By calculation, downward atmospheric long wave radiation is derived. For this reason CGR3 mbodies a temperature sensor. The CGR3 uses a specially designed silicon window. On the inside a solar-blind filter blocks solar radiation. The CGR3 data represents the radiation exchange within the whole hemisphere. This is because the reference CGR3 is calibrated outdoors with respect to a reference CG4, which has a 180 degrees field of view.

The CGR3 has been improved in many points over the CG3, based on customer feedback and years of experience. The CGR3 has a newly designed sunscreen that covers both body and connector to reduce the instrument temperature and further increase the accuracy. The design of the instruments accounts for the use of existing Kipp & Zonen mounting plates.

The base of the instruments contains the mounting holes, a spirit level and levelling feet for exact levelling. For ease of mounting, exchange and recalibration the instruments have a waterproof connector. The standard supplied 10 m. shielded cable has the waterproof sealed counterpart connector. The improved temperature dependency and directional response make these instruments the ideal choice for meteorological and agricultural applications.

(*) This product will need to be registered by the end-user within 6 months of purchase to activate the warranty extension.


Two CGR3s can form a net pyrgeometer

Back to productcategory

Specifications

Spectral range (50% points) 4.5 to 42 µm = 4500 to 42000 nm
Sensitivity 5 to 15 µV/W/m²
Response time < 18 s
Window heating offset < 15 W/m²
Zero offset B < 4 W/m²
Temperature dependence of sensitivity (-10 ºC to +40 ºC) < 5 %
Operational temperature range -40 to +80 °C
Net irradiance range -250 to +250 W/m²
Field of view 150 °
Non-linearity < 1 %

FAQ

Accessories

Accessory Description
CM121B/C Shadow Ring CM121B/C Shadow Ring
More information
To be used with Kipp & Zonen pyranometers, smart pyranometers, pyrgeometers and UV radiometers to shield the instrument from direct radiation. Add To Basket
LOGBOX SD Data Logger LOGBOX SD Data Logger
More information
LOGBOX SD is a weatherproof data logger specifically designed for use with Kipp & Zonen solar radiometers. It allows the connection of multiple instruments and their temperature sensors. It has a large storage capacity, thanks to the internal memory and a SD memory card. LOGBOX SD can work unattended in remote locations for several months on 4 x AA batteries. Add To Basket
AMPBOX Amplifier AMPBOX Amplifier
More information
AMPBOX is a current loop amplifier for the complete range of solar radiometers. Add To Basket
Adjustable Tilt Radiometer Mounting Kit Adjustable Tilt Radiometer Mounting Kit
More information
Mount a radiometer at a desired solar zenith angle between 0° and 90° to measure tilted global or diffuse radiation. Add To Basket